Add to EJ Playlist  Checkering a riflestock is an easy job if you have the right tools, a bit of know how, and some patience. Join Larry Potterfield, Founder and CEO of MidwayUSA, as he checkers the stock on a Winchester Model 67. Topics covered include the proper tools, layout, and the checkering of a traditional point checkering pattern.

Add to EJ Playlist  Once a riflestock has been refinished, its time to "finish the finish." Join Larry Potterfield, Founder and CEO of MidwayUSA, as he polishes out the finish on a Winchester Model 67 riflestock. This process gives complete control over the final look and shine of a gunstock, and is a standard part of the stockmaking process.

Add to EJ Playlist  Before a riflestock is ready for finish, it must be sanded, sealed, and the pores of the wood filled. Watch along as Larry Potterfield, Founder and CEO of MidwayUSA, prepares a Winchester Model 67 riflestock for finishing using the Miles Gilbert Advanced Stock Refinishing Kit.

Add to EJ Playlist  Was having some troubles with my P38 and the hammer following the slide home. There must not have been enough force to fire another round as the hammer followed the slide home, fortunately. The small spring came loose from it's groove, and that's why it was doing that. After ordering a replacement spring, I think this baby is tuned up for some 9mm!

Add to EJ Playlist  Demonstration of techniques for improving handgun recoil management. These techniques should be applicable to pretty much any make/model of semi-auto handgun, of any caliber. I am not an expert; these techniques were self-taught and developed over a number of years through research, dedication, focus, and consistent practice. This is merely an option among several proven techniques....c hoose one that works best for you. Relevant links: http://www.gunt horp.com/how%20 to%20shoot%20a% 20handgun.htm http://www.gund igest.com/artic le/tactical_com bathandgunsecre ts/ http://www.pers onaldefensesolu tions.net/ayoob _article.htm

Add to EJ Playlist  Loading pellets using the Gmac extended hollow probe. http://www.gmac customparts.com Gmac Custom Parts Please visit my website if you have questions, I do not monitor this Youtube account's messages.

Add to EJ Playlist  Its got your name on it...Get it now at http://leadslin gers.weebly.com Brand new modded for power. Tested so you know you dont get a lemon. For people who just cant wait for there new gun to came only to find out you have to return it because it dont work. This is great for people that want to work on custom 2240s but dont want to mess with the valve fearing they could have a leaky gun & this is easy to end up with. But I have made mistakes so you dont have to.

Add to EJ Playlist  http://www.gmac customparts.com How to fit a Gmac power adjuster, guided power spring and brass breech endcap. Please visit my website if you have questions, I do not monitor this Youtube account's messages. Gmac custom parts: modding a Crosman 2240

Add to EJ Playlist  http://www.gmac customparts.com How to fit a Gmac steel breech and bolt + extended probe. Please visit my website if you have questions, I do not monitor this Youtube account's messages. Gmac custom parts: modding a Crosman 2240

Add to EJ Playlist  http://www.gmac customparts.com How to fit a Gmac steel breech and bolt + extended probe. Please visit my website if you have questions, I do not monitor this Youtube account's messages. Gmac custom parts: modding a Crosman 2240

Add to EJ Playlist  http://www.gmac customparts.com How to fit a Gmac steel breech and bolt + extended probe. Please visit my website if you have questions, I do not monitor this Youtube account's messages. Gmac custom parts: modding a Crosman 2240

Add to EJ Playlist  http://www.gmac customparts.com How to fit a Gmac curved trigger, stainless steel sear and adjustable trigger spring. Please visit my website if you have questions, I do not monitor this Youtube account's messages. Gmac custom parts: modding a Crosman 2240

Add to EJ Playlist  Nigel Allen zeroes-in on Hawke Sport Optics latest Sidewinder 30 telescopic sight - the Tactical IR model which sports a new kind of mil-dot reticle

Add to EJ Playlist  ARC Identifier 65988 / Local Identifier 342-USAF-19674. Summary: World War II scenes starting out with CU of Army Field Order No. 1, IX Troop Carrier Command, then shifts to a group of high ranking officers looking at Mosaic of Europe. Shows the joint chiefs of Staff at Shape Headquarters sitting around a long table talking. Shows paratroopers loading jeeps and small armament into gliders and cargo planes pulling gliders loaded with men and equipment. Also shows mass parachute drops, mass glider flight, and glider takeoffs and landing. Shows Gen Eisenhower talking with enlisted personnel. (USAF By Army Air Force Combat Film Service, WWII). Reel 1: HEADQUARTERS, ATS COMMAND, WRIGHT FIELD, OHIO. 1) CU Air Force general seated at desk-sign below same "Lt Gen William S. Knudsen." 2) CU General Knudson delivering intrduction speech about film to be presented. THE AIRBORNE INVASION OF FORTRESS EUROPE. FROM THE ARMY AIR FORCES COMBAT FILM SERVICE PICTURE, D Z NORMANDY. 3) CU Field Order No. 1, 9th Troop Carrier Command. 4) CU page of Field Order No. 1. Par. 2-"9th Troop Carrier Command will transport and resupply parachute glider elements of the 82nd Airborne Division and the 101st Airborne Division and will be prepared to transport elements of the British 1st Airborne Division as directed. 5) CS man stamping Field Order, "Top secret". 6) CS Capt. of the 82nd Airborne Division briefing men using mosaic showing terrain. 7) CS animation of location or principle cities in Europe: London, Berlin, Talais, Paris, LeHavre. 8) Animation of coastal defenses on European continent. 9) PS giant concrete coastal gun emplacement. 10) PS large German railroad coastal gun being moved up out of the concrete shelter, German gun troops preparing to fire same. 11) Several quick scenes of various coastal gun defenses showing concrete structures, sandbag structures, and shots of a concrete base gun turret revolving. 12) CS huge coastal guns protruding from concrete gun emplacement. 13) PS huge steel and concrete tank barriers stretched across land. 14) PS large concrete and steel structure built along coast preventing assault craft from landing. 15) CS interior staff officer planning level, United Nations, representatives at table. 16) MS chiefs of staff of the United Nations conferring at large table. Marshall and Arnold sit near head of table. 17) Animation of invasion area near LeHavre. 18) PS from air of large airfield in Africa showing C-47 taking off towing glider. Large area covered with gliders and C-47s. 19) GS of C-47s taking off towing gliders from airfield in Africa for the invasion of Sicily. Troops being transported from British 1st Airborne and the American 82nd Airborne Division. 20) ADS dust raised as the aircraft takes off from desert airfield. 21) AS of other C-47s in flight towing gliders. 22) AS of C-47s towing gliders over water. 23) ADS of four C-47s towing gliders, low altitude over water. 24) Several CUs demolished gliders on airfields-glide rs used in invasion of Sicily. Glider crack-up due to pilot inability to stop prior to crashing into obstacle or crashing into ditches. INFORMATION TAKEN FROM FILM: Much information learned on glider operations from this field. Development of air brake and better control on gliders for future operation. 25) CS of gliders crashed in open field along coast and on edge or water showing demolished conditions of same. 26) CS glider lying, mostly submerged, along coast; fuselage, fabric torn from same, wing section badly damaged. 27) PS of dead paratrooper lying on edge of water near demolished glider. 27) AS C-47s in formation above clouds. 29) CU interior of aircraft showing parachutist jumping out of same. Jump scene in New Guinea. 30) AS interior aircraft showing multi-parachute jump in New Guinea. 31) AS formation of C-47s flying through clouds. 32) LS parachute jump in New Guinea. 33) CS instructor and paratroopers receiving training in the United states. 34) CS two men attaching link nose chain to glided. Name on glider, "Griswald Nose" used to protect glider and reinforce same during landing. 35) CS parachute arrester attached to rear underside of glider; parachutist pulling same from holder. [...] Good. Department of Defense. Department of the Air Force. (09/26/1947 - ) Made possible by a donation from John and Paige Curran.

Add to EJ Playlist  http://www.gmac customparts.com How to fit Gmac Crosman brass end caps and powerspring with guide. Please visit my website if you have questions, I do not monitor this Youtube account's messages.

Add to EJ Playlist  Checkering a Gunstock. Video taken with a Sony HDR CX100

Add to EJ Playlist  My P-38 WWII pistol.

Add to EJ Playlist  This is my old Crosman Powermaster 760,it was manufactured in the early eighties.I've owned it for almost 25 years now,it is not functional anymore but I keep it as a souvenir. check it out and hope you enjoy. Any questions send them my way I'll do my best. Please Comment,Rate,Su bscribe.

Add to EJ Playlist  Me shooting in Kuortane at the ISSF Rifle Training camp during Noptel training

Add to EJ Playlist  A few vet bring back WWII German handguns from my collection. Featured is a Walther P38 (byf 43), Luger '42' 1940, and a Mauser HSc Eagle L Police made in 1941.

Add to EJ Playlist  http://www.tren d-uk.com Enables mortise & tenons and dowel joints to be cut with a router. Ideal for cabinet, chair and table construction. With the Trend Mortise and Tenon jig, an adjustable template is used. Once set the user can cut the mortise and tenon simply by using a different cutter and guide bush combination fitted to the router. In each case the guide bush follows the inside of the template and guides the cutter to the required exact shape. This video demonstrates how to set-up and use the MT/JIG. You'll learn techniques and skills you can easily apply to a wide range of woodworking projects to make with the Mortise and Tenon Jig. Visit our website for comprehensive information on the entire Trend range and details of your nearest stockist.

Add to EJ Playlist  This video shows how to shoot a spring-powered air rifle accurately using the artillery hold. If you feel your air rifle could be more accurate, this video will show you how to improve your shooting.

Add to EJ Playlist  Overview of the Tech Force 79 Air Rifle and inner workings. The Tech Force® 79 has been praised for its outstanding accuracy. Although not yet classified by the NRA as either a sporter or a competition rifle, this new rifle has the features to qualify it for both classifications , including a sleek competition style stock, a competition diopter peep sight and interchangeable front sight inserts. It is powered by CO2 and can be filled by using two standard CO2 cartidges. The rifle also comes with standard open sights and is grooved for mounting a scope. The single stage trigger is adjustable for both pull and travel. Tech Force 79: http://www.comp asseco.com/tech -force-p-926.ht ml http://www.comp asseco.com

Add to EJ Playlist  Photoshoot of my Crosman 2400KT and 2300KT, bought at the Crosman custom store, upgraded with a lot of Gmac custom parts. http://www.cros man-air-pistol- owners-forum.co m

Add to EJ Playlist  http://www.info tiro.com - Echamos un vistazo a la crossman 2250

Add to EJ Playlist  CZ slavia 631 in customised with LP EagleEye model stock. Custom Elven engravings based on Lord of the Ring film. custom finish. egzotic intarsions. Walnut wood.

Add to EJ Playlist  Here is something I know alot of people ask about, but I have yet to see a video on the subject (I may stand corrected, I personally have just never seen one). Building a spring compressor to modify or cleanup your air rifle, all for about $40 depending on what materials and tools you already have. I have to stress yet again that this a direct reflection of your own skill, no to say I am a professional or anything, but I have 2 diplomas in technical fields and a few years of experience, so I am confident in my own building abilities. If you are not, do not attempt this, if you don't know how to disassemble your gun completely do not attempt this. Not trying to scare anyone, just letting you know there can be serious pressure when you release the lock pin, and serious injury could occur if the correct precautions are not taken. So for those with the proper abilities and tools this is not a very difficult project by any means, and if you follow the directions and think logically you will have no problems. If you have any questions message me and i'll try to help as best i can....

Add to EJ Playlist  A step by step guide of how to fit the power adjuster and spring for the crosman ratcatcher.

Add to EJ Playlist  Increase the muzzle velocity of your QB78 family air rifle by replacing the breech seal. This technique also applies to other QB78 family air rifles including the stock QB78, QB79, AR2078, AR2078A, AR2079 TF78 and TF79.

Add to EJ Playlist  showing my custom modded 2240 in A Exploded view showing the valve work and reassembling the gun. For part 2 click here http://www.yout ube.com/watch?v =_GJpR8Yx_ic Also if anybody want's custom work done on your 2240-1377 pellet guns or repairs on most Crosman gun's Shoot me A E-mail.